Roll over image to zoom in

AMBRO-SOL P301 SPRAY SILICONE SEALANT REMOVER 400ML

Item No: 0243774
This spray works perfectly with fresh silicone and with hardened silicone. It removes silicone and its residuals without ruining the surface. This is another amazing product included in the Ambro-Sol “Cleaning” line                                     

SILICONE SEALANT REMOVER – Mix of solvents, designed to remove
excess silicone or silicone scraps. The product acts more quickly in the
presence of fresh silicone than it does in the presence of hardened silicone. When large amounts of silicone need to be removed, begin by removing as much silicone as possible. Afterwards, apply the solvent. It
does not corrode or tarnish any surface.
In stock
Technical Specifications:
Barcode EAN: 8034108890319
Quantity 400 ml
Box / Case 12 Pz.
Aspect Tin-Plate can containing under pressure fluid
Color Light white
Odour Characteristic of solvent
Relative density at 20°C 0,68 ÷ 0,72 g/ml
Flash point Und. 0° C extremely flammable
Pressure at 20°C 4/6 bar
Water solubility insoluble
Solvent solubility Total
Viscosity at 100°C 3,8 cSt (dry residue)
Melting point 52-62°C ( dry residue )
Penetration test <= 30 dmm (25°C) ( dry residue )
Observations Product with gel technology, it doesn’t drip.
SILICONE SEALANT REMOVER – Mix of solvents, designed to remove
excess silicone or silicone scraps. The product acts more quickly in the
presence of fresh silicone than it does in the presence of hardened silicone. When large amounts of silicone need to be removed, begin by removing as much silicone as possible. Afterwards, apply the solvent. It
does not corrode or tarnish any surface.
Silicone Sealant Remover 400 ml (P301)
HOW TO USE: On Fresh silicone: Shake well before use and spray on the surface from a distance of about 15 cm, leave to act for a few
minutes and then clean with a cloth or scrapping tool.
Hardened silicone: Scrape the biggest section carefully with a blade or putty knife. Shake well before use and spray the surface from a
distance of about 15 cm and leave the product to act for a few minutes. Remove with a rag or scrapping tool Repeat the operation if
necessary.
MODALITY OF STORAGE
Before using: stock the product in a dry location and don’t stock it with a temperature under 0°C and over 45°C, after the use, keep containers closed. In the original
package, the product can be conserved for 24 months (warranty). The product doesn’t expire.
After the first usage: conserve in a fresh and dry location, away from hot spring. Keep out of reach of children.
Brand Ambro-Sol
Barcode 8034108890319
SupplierItemNumber 29.150021
Category Sealants
Capacity 400ml
Original Price 0
On Offer No